De Mim NÃ£o Posso Fugir, PaciÃªncia - Technical Rider

de mim não posso fugir, paciência!
(from myself I can't get away, whatever!)

technical rider

1. stage and set

The stage should be at least 10m wide and 8m deep (plus backstage and service area) and completely levelled.

The minimum height (fly bars if possible) should be at least 6m.

The stage floor should be covered with non reflective black dancefloor.
There should be a black backdrop hung on the last flybar.
The right stage wing is to be open (no legs or drops), therefore the stage wall should be as neutral as possible (pref. black).
The left stage wing is to be covered with a single drop leaving a single entrance ca. 1m wide upstage.

2. Lighting gear

The houselights should be controlable by DMX512 and should not leak onto the stage.

Lighting material to be supplied by the venue:

10 - PC's (PrismConvex) 1kW with barndoors and colourframe
06 - PC's (PrismConvex) 2kW with barndoors and colourframe
26 - profile spots Robert Juliat 614SX
01 - Fresnel 5kW

48 dimmer channels dmx512 with linear response

dmx cable from the dimmers to the sound and lighting booth (male 3 pin used 1 - ground / 2 - positive / 3 - negative)

We will bring our own lighting desk with us.

For the needed cables please consult the sketch below.

3. Sound

PA:
a 2 point source system (left/right and subs) each point granting full coverage of the audience (20Hz-20kHz @ 98dBa SPL) preserving 12dBu of headroom thruout the whole system.
for large venues we will need an additional central cluster
2 floor monitors providing full stage coverage

Source/Process:
there should be a graphic EQ (1/3 octave - 31 bands) for each PA and foldback send.

1 - grand piano (pref. Bösendorfer Model 225)
1 - FOH mixing desk 16-4-2+1 (4 band param. EQ /ch)
4 - Crown PCC 160 (for large venues only)

The system should be ready to be set up upon our arrival.

4. Sketches

in some systems this sketch might not be complete, for accurate information please refer to this file in AutoCad 3D 2004 DWG format, compressed DXF 3D or in encapsulated Postscript
depending on your connection and system this application might take up to 10 minutes to load

the drawing below is just an example, please send us a sketch of your venue we'll try to adapt the technical specifications.

5. Working schedule

			local technicians
day	period	tasks	sound	light	rigging	stagehands
1	morning	setup set / light / sound	1	3	1	0
	afternoon	focus	0	2	1	0
	night	sound check / program	1	1	0	0
2	morning	break	0	0	0	0
	afternoon	runthru / corrections	1	1	1	0
	night	show	1	1	0	0

6. dressing rooms

We will need a dressing room for 5 dancers with shower facilities and a backup room for storage and production support.

7. laundry service

Laundry service for 5 black costumes. Washing and drying after the show.

8. contacts

technical matters:
Anatol Waschke
anatol[at]anatol[dot]biz
+351 914 937 950
www.anatol.biz

production:
Sofia Matos
+351 966 379 333
sofiamatos[at]bscultural[dot]org

document copyleft by Anatol Waschke

de mim não posso fugir, paciência!(from myself I can't get away, whatever!)